Keep the tower up. Fleet Vision reads the diesel gensets, backup power, shelter cooling and field-service vehicles that keep a mobile network on air — and predicts which unit will fail, weeks before the site goes dark. Read-only, in your cloud or on your LAN.
Fleet Vision Telecom watches the physical assets that power and support your sites — the standby diesel gensets at towers, the DC / backup plant, the shelter cooling that keeps radios alive, and the field-maintenance vehicles. It reads what those assets emit, diagnoses each subsystem and predicts failures before a site drops.
It is not a network-performance monitor. It does not touch RAN, core, base-station radios, fibre or OSS/BSS — that is a different domain you already have covered. Fleet Vision sits under the network, on the power and field-fleet layer a RAN monitor never sees — where an unseen genset failure still takes a site off air.
Read-only. It only ever listens; it never sends a command to any equipment.
Reads each standby genset's own data — cooling, lubrication, fuel, aftertreatment, run-hours — and flags a unit trending toward failure before the stop-lamp.
Watches battery autonomy — how many hours of backup a site truly has left — and whether the site is on mains or running on backup right now.
Ranks every site worst-first by how close it is to going dark, so a region plans its week and protects its SLA — not one dashboard per site.
Reads shelter HVAC and cooling health — a rising cabinet temperature is a risk to the radios inside, surfaced before it trips.
The maintenance vehicles that carry the fix are read too, so the truck heading to a remote site doesn't itself strand on the way.
Every call states the signals it rests on; a missing limit is named, never invented. Predictions are a modelled trend with a stated confidence, and each decision leaves a signed record.
From the utility feed to the radio cabinet, Fleet Vision reads every link in the power chain that keeps a cell site on air — and the field vehicles that service it. Read-only, no new hardware.
J1939 engine data — coolant, oil, fuel, aftertreatment, run-hours — per unit, trended for early failure.
Transfer-switch state and mains-vs-generator status — know instantly which sites are running on backup.
Rectifier health, load and DC bus voltage on the -48V plant that feeds the radios.
VRLA and Li-ion autonomy — true hours-of-backup remaining, degradation and end-of-life warning.
Cabinet and shelter temperature and cooling health — a rising cabinet temp is flagged before it trips radios.
Fuel level and consumption trend — plan the fuel run and catch pilferage or leaks early.
Reads the RTUs and site controllers you already run over standard telecontrol protocols — no rip-and-replace.
The O&M vehicles that carry the fix are read too, so the truck to a remote site doesn’t strand on the way.
Ordinary monitoring tells you a genset is already down. Fleet Vision watches the trend of each unit's own signals and tells you which one is going to fail, and roughly when — so the fix moves from a midnight emergency to a planned visit on the next fuel run.
Signals begin to drift — coolant creeping, oil pressure easing. Nothing has tripped.
The site is marked WATCH, ranked worst-first, with an estimated time-to-limit.
Serviced on the next fuel run — one trip, the right part in hand.
The tower never goes dark. No SLA penalty, no emergency roll-out.
Basic telematics shows a dashboard of live numbers and rings an alarm when one crosses a line — still reactive, a different tool at every site, and it can't tell a CTO why a decision was made. Fleet Vision predicts early, ranks the whole estate, finds the common cause across sites, and proves every call.
Network operations, energy & power teams, tower-company O&M, and field-maintenance leads — anyone responsible for the power that keeps the radios alive and the SLA intact.
Fleet Vision Telecom is engineered to read equipment and consume telemetry the way these standards intend — read-only toward every asset, evidence-first, and safe around operational technology.
Standard names denote the frameworks Fleet Vision is engineered to align with and support; they do not imply certification unless separately stated for a given engagement.
How read-only, standards-aligned site-power intelligence changes the week for the teams that keep networks on air.
Challenge: a national estate of standby diesel gensets serviced on a blind calendar, with repeated night call-outs when units failed.
With Fleet Vision: each genset ranked worst-first on its own J1939 signals; failing units flagged weeks ahead and serviced on the next scheduled fuel run.
Result: emergency truck-rolls cut sharply; sites held above SLA.
Challenge: true backup autonomy per site was unknown, causing avoidable outages during grid failures.
With Fleet Vision: real hours-of-backup remaining and mains-vs-backup state surfaced per site, with battery degradation trended.
Result: at-risk sites prioritised before grid-failure season.
Challenge: data was locked in existing RTUs and controllers, with a different dashboard for every vendor.
With Fleet Vision: reads existing RTU telemetry over standard telecontrol protocols into one worst-first view across the whole estate.
Result: one control room replaced per-site dashboards — no new hardware.
Representative deployment scenarios based on Fleet Vision’s real capabilities; figures illustrate typical outcomes and are established on your own estate during a proof-of-value engagement.
Runs on your LAN, in your cloud, or fully air-gapped. Multi-tenant and white-label from one install — a tower company can run it across many operator customers, each isolated. Reads the gateways and controllers you already have; no new boxes to buy.
Book a walkthrough and we'll show you the control room with a demo site-power estate, then talk through a read-only pilot on a handful of your gensets — no new hardware, zero risk to any site.
Same read-only, evidence-first platform — also extended to drones, satellites, ground stations, radar and deep-space links.
Fleet Vision Telecom is read-only by design — it reads power and field-fleet equipment and never sends control commands. It is the power-and-cooling layer beneath the network; RAN, core and transport monitoring stay with your network tools. Results are established on your own estate during a proof-of-value engagement.
Fleet Vision Telecom is designed to support the reliability and security frameworks that govern network site infrastructure — as the read-only power-and-cooling intelligence layer beneath the network.
Condition-based genset and power maintenance to protect site uptime.
Site-power assets managed by measured risk across the estate.
Read-only, segmentable deployment that never commands site equipment.
Supports the reliability and measurement discipline telecom operations expect.
Designed to support and align with the frameworks above. Alignment describes how the platform fits your program; it is not a claim of independent certification unless separately stated.
Fleet Vision Telecom is designed to deliver value on day one for a small team, and to scale to a governed, multi-site enterprise deployment on the same platform.
Illustrative walkthroughs of how Fleet Vision Telecom is used and the value it creates. Your figures are set on your own data during a proof-of-value engagement.
Coolant creeps and oil pressure eases weeks before failure; the site is flagged WATCH and serviced on the next scheduled fuel run — the tower never goes dark.
A site running on backup with falling battery autonomy is escalated by hours-remaining, so the crew reaches it before the site drops.
A recurring fault across many sites is traced to one common cause — a batch, a supplier, a duty profile — and fixed once, estate-wide.
A scoped engagement shows the results measured on your own operation before any wide rollout — then scale across the organization on the same platform.
Book a proof of valueThe same platform serves a single team and a global operation. Here's what that looks like at each scale — and how to get started.
| What you get | Growing & mid-size business | Large organization / enterprise |
|---|---|---|
| Deployment | Single cloud VM or one on-prem box — live quickly | On-prem, air-gapped or private cloud, across many sites — inside your boundary |
| Scale | One team, plant or fleet | Thousands of assets, sites and users — ranked and prioritized |
| Users & access | Simple access for a small team | Role-based access, SSO-ready, multi-tenant isolation |
| Branding | Your own instance | White-label — your name, colors and domain, per customer or unit |
| Governance & audit | Signed, shareable reports | Full audit trails, signed evidence, compliance-ready records |
| Integration | Works with the tools you already run | Sits alongside enterprise systems — no rip-and-replace |
| Commercials | Predictable, seat-based licensing | Volume & enterprise agreements, proof-of-value first |
| Support | Onboarding and standard support | Dedicated success manager, SLAs and co-planning |
| Get started | Book a demo — see it on your data | Proof of value — measured on your own operation, then scale |
